10% OFF On Your Order! Use Code: SAVE10 DETAILS

How to Hanging a Flag on a Pole

When you’re hanging a flag in front of a home or a business, using a flagpole is usually the best way to go about it. It allows you to hoist the flag up high, let it billow in the wind, and be seen from far and wide. However, if you’ve never hung a flag from a pole before, you may not know the best way to go about it.

This guide will show you exactly how to hang a flag on pole, covering several different methods.

How to Hanging a Flag on a Pole

Inspect the Flag First to Identify the Best Mounting Method

Flags come in a wide range of shapes, sizes, and colors. They may also come with various pieces of mounting hardware built into their design. Some come with grommets, for example, which are metal rings down the side of the flag that you can put ties or hooks through.

Empty 3d pennant

Others come with pole pockets, letting you slip them right over a pole with ease. Then, there are flags that have no holes, hoops, or clips of any kind, consisting of single pieces of fabric. Such flags can be a little trickier to work with, but it’s still possible to hang them on a pole with the right equipment.

By inspecting your flag, you can work out which mounting method will work the best. Look along the side of the flag to see if the fabric folds around to form a pocket or if there are any grommets you can use. Then, choose an appropriate hanging method from the list below.

How to Hang a Flag on Pole With Pole Pockets

If your flag has a built-in pole pocket, you’re in luck. Such flags are very straightforward to hang. Indeed, if you want to know how to hang a flag on pole with minimal fuss, it’s best to buy flags with pole pockets built in. Here’s how to use them.

  1. Slide the end of the pole into the pole pocket.
  2. Feed the pole further into the pocket until you’re satisfied with the flag’s position.
Low angle view of usa flag against a string of lights

Note: This method works best with poles that are either horizontal or at a 45-degree angle. On vertical poles, the flag may slip down due to gravity. So, if you intend to hang your flag from an upright pole, it’s better to use a different method.

How to Hang a Flag on Pole With Grommets: Use Cable Ties

If the flag you want to hang has grommets, there are a couple of ways to suspend it from a pole. An easy option is to use some simple cable ties or zip ties. Typically used for tying cables together, these little ties are cheap and easy to work with.

  1. Position your flag beside the pole.
  2. Place a cable tie through one of the grommets, wrap it around the pole, and tighten it to secure the flag in place.
  3. Repeat the process for the second grommet and any additional grommets on your flag.

How to Hang a Flag on Pole With Grommets: Use D-Rings or Snap Hooks

Another way to hang a flag with grommets is by using D-rings or snap hooks. This method is the best one to choose if you want to hoist the flag up a tall pole with the aid of a rope.

  1. Measure the distance between the top and bottom grommets on your flag. You’ll need to position the hooks the same distance apart on your rope.
  2. Run a loop of the rope through the eye of each hook.
  3. Pull the loop over the hook and tighten it to secure the rope in position.
  4. Clip your hooks or D-rings into the grommets of the flag.
Red pennant flags mockup blank vertical banners hanging on golden flagpole 3d render medieval textile pennons different shapes on gold stand isolated on white background realistic illustration set

How to Hang a Flag on Pole Without Grommets or Pockets: Use Banner Clips

If your flag doesn’t have grommets or pole pockets, you’ll need to use a different method. Fortunately, banner clips can be snapped directly onto the side of the flag material. Here’s how to use them:

  1. Prepare the first clip with the bottom side facing you.
  2. Push the teeth down and pull the ends of the clip apart.
  3. Flip the clip over and put the extended end section on the part of the flag you wish to attach it to.
  4. Push the upper part of the clip down and over the flag material. Listen for the sound of the teeth clicking into place.
  5. Repeat the process for your second clip (and any additional clips, if needed).

Once the clips are attached, you can use them just like grommets to attach your flag to a pole. To do this, you can feed cable ties through the holes and secure them in place around the pole. Alternatively, you can attach your flag to a rope with the aid of D-rings or snap hooks, as follows:

3d flag 3d label 3d tag
  1. Measure the space between the two clips. Make sure you use that same distance when measuring your rope.
  2. Run a loop of rope through the eye of each hook or ring.
  3. Pull the loop over the top of the hook/ring and draw it tight.
  4. Attach your hooks or rings to the banner clips of your flag.

Make Amazing Custom Flags With Custom Flags Now

There you have it – how to hang a flag on pole in four different ways. Now that you know several methods to hang flags, you may want to order some of your own. Alternatively, you might want to buy some flags that come with poles and stands, making them especially easy to set up.

Blank white flag waving in the wind on a blue sky background

Either way, Custom Flags Now is the perfect place to buy any flag you want. We offer fully customized flags with lots of sizes, styles, shapes, and colors to pick from. You can even add your own text, artwork, and logos to the flag designs and get them delivered on any date of your choice.

Head over to Custom Flags Now to learn more and start creating fabulous flags today.

Related articles


Saving Design